What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
16.06.2025 05:47

At least they know the answer if they wanted it.
nine
What is lightning?
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
What does a fuse do?
What is the best way to end a relationship with someone who has future plans with you?
Edit 2024–10.
[old diagram got deleted by accident]
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
If white people had been slaves, would WLM be a thing right now?
A fuse is a non-resetable over current circuit protector.
One
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
What is the best case of “You just picked a fight with the wrong person” that you've witnessed?
the problem then depends on "how fast does the fuse operate?".
So, the voltage could go up to 500 volts, and the fuse will not open up.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
What are your controversial and hot takes on Naruto?
This one hit behind the barn.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
One is “what exactly is in a ‘surge protector’ ? ”
How can people balance religious beliefs with seeking professional mental health care?
This is 'the assistant's answer'
These are simplified answers to the original question, and does not change anything I wrote above.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
but I think this circuit , shows a few more pieces.
what exactly is a ‘surge’ protector?
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
What would it take for you to consider yourself a "Swiftie" like Flavor Flav?
a photo is worth a thousand words.
This is where this question deviates from being a 'generic' question, and becomes more specific.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
What’s wrong with anti-imperialism?
In schematic diagrams this is the symbol for a fuse:
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
How good is KIIT school of management at Bhubaneswar?
He then describes the function of a fuse.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
but this device (an Inductor) … impedes the rapid changes in the current.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This device then solves the entire problem.
Now when you have a certain ac resistance, then a current flows in a loop.
Barnstars:
There are two important concepts here.
He then describes Rainy Season and Lightning.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
The other is “what does a “fuse” do?”
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
But it can get overloaded, and no longer works.
It seems Mohan does not understand the difference between a comment and an Answer.
so, what happens?
eight
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Because the load is inductive, the current lags the voltage.(by a bit).
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
First Sentence:
(Dc diagram shown, AC is similar).
[image of Common-mode choke]
There are three different concepts here that are getting confused.
It also is a device that limits the change in current flow.
The bolt then partially travels down the line to your home.
An AC voltage/ current source, and an ac inductive load.
I post the exact comment here.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
For this case there are devices called Metal oxide varistors (MOV).
Upvotes:
2024–10–16 [ OO OLAOYE OYEBODE ]
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
But… the neutral is now “floating” because of the 1 ohm resistance.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
At one ohm, the resistor has a maximum of 1 watt power.
A circuit breaker is similar, but is resettable.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
2024–10–10[John johnson John Johnson ]
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
The third is lightning and “how it gets conducted into a home.”
2024–10–14 [Omar Gharbi Omar Gharbi ]
He then asserts :
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Here is a simplified AC power diagram.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
The MOV will conduct when the voltage exceeds 50% of line voltage.
This is where the MOV conducts again, and dissipated the energy.
These devices are installed between the “hot” and “neutral” and protective ground.